BGPKJ - 16-359 TOOLMAKERS LAYOUT INK REMOVER
- MSDS: BGPKJ
- Manufacturer: SEYMOUR OF SYCAMORE INC
- Product Name: 16-359 TOOLMAKERS LAYOUT INK REMOVER
- National Stock Number: 6850-01-158-9378
Product Identification
Product ID:16-359 TOOLMAKERS LAYOUT INK REMOVER
MSDS Date:04/14/1987
FSC:6850
NIIN:01-158-9378
MSDS Number: BGPKJ
Responsible Party
SYCAMORE, IL 60178-1343
US
Emergency Phone: 815-895-9101
Info Phone: 815-895-9101
Cage: 59581
Contractor
Telephone: 815-895-9101/800-255-3924
Cage: 59581
Ingredients
DIBUTYL PHTHALATE (SARA III)
CAS: 84-74-2
RTECS: TI0875000
Fraction By Weight: 0.19%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
DI-SEC-OCTYL PHTHALATE (DI-2-ETHYLHEXYL-PHTHALATE) (SARA
CAS: 117-81-7
RTECS: TI0350000
Fraction By Weight: 0.67%
OSHA PEL 5 MG/M3/10 STEL
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 2.03%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ISOBUTYL KETONE (SARA III)
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: 2.41%
OSHA PEL 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ACETATE
CAS: 108-21-4
RTECS: AI4930000
Fraction By Weight: 14.40%
OSHA PEL 250 PPM/310 STEL
ACGIH TLV: 250 PPM/310STEL;9192
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 38.13%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ETHYL ACETATE (SARA III)
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 1.09%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 1.88%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 0.93%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 5.49%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 2.70%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
N-PROPYL ALCOHOL
CAS: 71-23-8
RTECS: UH8225000
Fraction By Weight: 13.7%
OSHA PEL 200 PPM/250 STEL
ACGIH TLV: S,200PPM/250STEL9192
ISOBUTANE
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 9.1%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE.
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, NAUSEA,
POSSIBLE UNCONSCIOUSNESS AND ASPHYXIATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING STOPS, GIVE
ARTIFICIAL RESPIRATION. GET IMMEDIATE MEDICAL ATTENTION.
EYE;IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER.
INGESTION: CALL A PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point:N/R (AEROSOL)
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE
USED TO COOL CONTAINERS TO PREVENT BURSTING. WATER FOG IS
RECOMMENDED. WEAR GOGGLES AND SCBA.
Unusual Fire/Explosion Hazard:EXPOSURE TO HEAT MAY CAUSE BURSTING OF
AEROSOL CAN.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, AVOID
BREATHING VAPORS, VENTILATE AREA. WIPE UP WITH INERT MATERIALS AND
PLACE IN APPROPRIATE CONTAINER.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEG F. EXPOSURE
TO HEAT OR PROLONGED EXPOSURE TO SUN MAY CAUSE BURSTING.
Exposure Controls
Respiratory Protection:AVOID CONTINUOUS BREATHING OF VAPORS AND SPRAY
MIST. A SELF CONTAINED BREATHING APPARATUS REQUIRED FOR
CONCENTRATIONS ABOVE TLV LIMITS.
Ventilation:USE WITH ADEQUATE VENTILATION, SUFFICIENT TO PREVENT
INHALATION OF SOLVENT VAPORS. MECHANICAL (GENERAL) OR LOCAL AS REQD
Protective Gloves:OPTIONAL USE OF RUBBER GLOVES
Eye Protection:SAFETY GOGGLES OR FACE SHIELD FOR MIST.
Other Protective Equipment:NONE RECOMMENDED BY MANUFACTURER.
Work Hygienic Practices:AVOID CONTACT WITH EYES,SKIN. IN CASE OF
CONTACT,WASH THOROUGHLY. REMOVE AND LAUNDER CONTAMINATE CLOTHING.
Supplemental Safety and Health
Chemical Properties
HCC:V3
Vapor Density:<1
Appearance and Odor:AEROSOL IN CAN.
Percent Volatiles by Volume:85
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT BLEND WITH AMINES OR ALKALINE MATERIALS OR STRONG ACIDS.
Stability Condition to Avoid:DO NOT STORE ABOVE 120F.KEEP FROM
SPARKS,PILOT LIGHTS,FLAME.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION. FUMES MAY CONTAIN OXIDES OF
NITROGEN,HYDROGEN CYANIDE&CO.
Disposal
Waste Disposal Methods:DO NOT INCINERATE AEROSOL, DISPOSE IN ACCORDANCE
WITH OCAL, STATE AND FEDERAL REGULATIONS. DO NOT PLACE AEROSOL CANS
IN HOME COMPACTOR. DO NOT PUNCTURE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.